Home > Environmental Technologies > Neutra-Mill Technology

   The Neutra-Mill Technology

The Neutra-Mill Technology is at the heart of many of our water treatment systems and provides an effective means of efficiently mixing reagents to be dispensed directly or indirectly into a water body. The key to this simple but ingenious technology is a partially submerged rotating mixing chamber that is partially open at both ends. Reagent is fed into the chamber where it is mixed, abraded and agitated until released as a plume of fine suspension or concentrated solution at the end of the chamber. This provides a mechanism for removing the inhibiting precipitates that often form around reagent particles (e.g. when lime is used to treat acidic waters). The buoyancy effect of water and the semi-autogenous abrasion process significantly reduce the energy and infrastructure requirements to mix and dispense sparingly soluble reagents such as quicklime and hydrated lime.

Neutra-Mill Water Treatment Systems

We have developed a range water treatment systems constructed around the patented and proven Neutra-Mill Technology. Using this technology allows us to provide you with systems that are capable of mixing and dispensing different reagents, but are a fraction of the cost of conventional systems with a comparable output. Neutra-Mill Water Treatment Systems come in many different configurations and have a range of applications.

Mine site water - acid drainage management
Emergency response wastewater treatment
Drinking water
Emergency response potable water treatment
Treatment prior to reuse
Cyanide treatment
Wastewater treatment (municipal and industrial)
Odour reduction
Lowering total dissolved solids
Removal of suspended solids / turbidity control
Lowering toxic metal concentrations
Acid neutralisation - pH control
Limestone dispensing
Controlling nutrients
Supplementary or pre-treatment at existing plants
Potable water treatment in developing nations

Case studies

A Neutra-Mill Water Treatment System Can Help You:
minimise the capital cost of water treatment.
treat water at multiple sites with portable systems.
treat water at remote or logistically difficult sites.
efficiently dispense large or small volumes of reagent.
provide an emergency response treatment capability.
mix and dispense more than one reagent.

 
 
 

Low infrastructure requirements - reduced capital costs
Neutra-Mill Water Treatment Systems are compact, light-weight, and inexpensive to operate, but deliver the performance of a much larger conventional treatment system. Where appropriate, they can be designed to either float directly on the water body requiring treatment (water based) or on the ground adjacent to the water requiring treatment (land based). This approach overcomes the need for complex mixing and agitation chambers, delivery pumps and piping associated with conventional land based plants, by taking the treatment plant to the water rather than pumping water to the plant, significantly reducing infrastructure requirements and costs.

 
 
 

Dispense multiple reagents - multiple applications
Innovative design facilitates the efficient use of many treatment reagents for multiple applications.
Quicklime
Limestone
Alum
Iron compounds
Calcium hypochlorite
Biological agents
Hydrated lime
Soda-ash
Mineral products
Chloride compounds
Copper sulfate
Adsorptive media (e.g. modified clays, zeolite


   
 
    Address: 19F World Plaza, 855 Pudong South Road, Shanghai 200120
    Email: enviro@earthsystems.com.cn
    Telephone: +86-21-6887 2968		 Website: http://www.earthsystems.com.cn
Fax: +86-21-6887 2969